Heat Pumps - View Heat Pump Systems and Compare Pricing - Trane® (2024)

FAQs

Which heat pump system is the cheapest to operate? ›

Not only are geothermal heat pumps the most eco-friendly option on the market, they also offer the most economical and efficient option when it comes to utility bills. However, the up-front cost of these can be extremely high due to the complicated and time-consuming installation.

Trane Heat Pump Costs

The price for a Trane heat pumps can range from $4,600 to $12,000 in total installation costs. Your total installations costs will largely depend on the size of the system needed for your home and the SEER rating of the heat pump.

Like Trane's air conditioners, its heat pumps don't offer the highest energy savings available and can be noisier than comparable offerings from other brands. But they are rigorously tested, and reviewers consider them to be among the highest quality available. Trane's heat pumps feature: SEER ratings of up to 20.

You'll need at least a 4-ton heat pump for a 2,000 square-foot home. This size heat pump will cost $4,200 to $7,500 for both the unit and installation.

Heat Pumps Can Be Noisy

While modern heat pumps are designed to operate quietly, they can still produce more noise than some traditional heating systems, especially older or less efficient models.

A heat pump has similar operating costs to an air conditioner in the cooling season. During the heating season, the operating costs for a heat pump can be much lower than a traditional furnace. The average lifespan of a heat pump is generally 15 years.

If you prioritize vitality efficiency and lower forthright costs, Carrier might be the better option. However, if you esteem durability and are willing to invest more at first for a longer-lasting system, Trane could be the right choice.

Differences Between 14-SEER vs 16-SEER

In layman's terms, for every $100 you spend with a 14 SEER unit, you would only spend about $87 with a 16 SEER unit. However, calculating your savings depends on the size of your unit and how much cooling you do each year.

Air-source pumps typically last about 10-20 years, with 15 years being the average lifespan. Meanwhile, with proper maintenance, geothermal heat pumps often last 20-25 years. Keep reading to learn about the key factors that affect how long an air-source heat pump lasts.

High-efficiency heat pumps: Generally speaking, models rated at 17 SEER2 and above should be considered highly efficient heat pumps. Some of the highest efficiency air-source heat pumps are rated at up to 22 SEER2.

What size heat pump for 1200 sq ft? ›

If you have a 1,200-square-foot home with standard-height ceilings, you'd typically need between a 48,000- and 60,000-BTU heat pump. All central heat pumps are measured in tons, and every one ton is equal to 12,000 BTUs. This means that a 1,200-square-foot home would usually need either a 4.5- or 5-ton heat pump.

Given that a 20 SEER unit cost nearly $5,000 more than a 13 in our online shopping, the jump may not be worth it, unless your home is enormous, your electricity remarkably expensive, or you live in Death Valley. As we mentioned above, you're better off getting a low SEER heat pump than a high SEER AC unit.

Trane Technologies owns American Standard, Trane , Oxbox, and RunTru.

Set the temperature between 20°C and 22°C. Setting the temperature higher makes it work harder and it will be less efficient. Running a heat pump at 26°C will use 50% more power than at 21°C. If you are not at home during the day, turn the heat pump off when you go out.

Geothermal heat pumps (also known as ground-source or water-source heat pumps) achieve higher efficiencies by transferring heat between your house and the ground or a nearby water source.

At first glance, heat pumps appear more expensive than air conditioners since they cost more up-front. However, even though heat pumps have higher equipment costs and cost more to install, the cost to run them long-term is lower since they're typically more efficient than a comparable air conditioner.

The most energy-efficient tumble dryers – hence the cheapest to run – are heat pump tumble dryers. Condenser dryers come next, closely followed by vented dryers. Gas tumble dryers are comparable to heat pump dryers in terms of energy efficiency and cost.